Alternator Chaincase Cap Screw Kit: BSA A7 & A10 - Image 1
Click to enlarge
BSA Footrest Stud Assembly
BSA Footrest Stud Assembly Price range: £12.60 through £13.25
Back to products
BSA Gearbox Adjuster Set
BSA Gearbox Adjuster Set £74.00

Alternator Chaincase Cap Screw Kit: BSA A7 & A10

£12.50

This kit is for fixing the chaincase cover on A7, A10 and other BSA’s fitted with an alternator.

Compare
Add to wishlist
SKU: A10ALTSC Categories: , , Tag:
Description

This kit is for fixing the chaincase cover on A7, A10 and other BSA’s fitted with an alternator.

Related products

Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view