BSA Gold Star Brake Rod Assembly - Image 1
Click to enlarge
BSA A50/A65 Brake Rod Assembly
BSA A50/A65 Brake Rod Assembly £30.00
Back to products
Stud 3/8"-26TPI BSC
Stud 3/8"-26TPI BSC Price range: £3.00 through £8.00
BSA

BSA Gold Star Brake Rod Assembly

£30.00

Complete brake rod assembly for Gold Star, Rocket Gold Star, B31, some A7 and A10 models.

5 in stock

Add to compare
Add to wishlist
SKU: BSAGBRA Categories: , , Tags: , ,
Description

Complete brake rod assembly for Gold Star, Rocket Gold Star, B31, some A7 and A10 models.

Additional information
Weight .42 kg
Dimensions 18.5 × .75 × .75 in
Finish

Polished
Fits

BSA A7/A10

,

BSA B31/B33

,

BSA Gold Star

,

BSA Rocket Gold Star
Makes

Stainless Classics
Brand

BSA

Related products

Add to compare

A65 Fork Top Nut Set

,
£29.00
These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50
This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs. 3/4"-20TPI
Add to wishlist
Add to basket
Quick view
Add to compare

BSA and Triumph Fork Top Nut Washers

,
£5.00
These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamp Spacer

,
£4.80
These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00
A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Top Yoke Extended Nut

,
£5.50
This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50
For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.
Add to wishlist
Add to basket
Quick view
Add to compare

Handlebar Clamp Screw BSA

,
£2.80
These are the normal short clamp screws, used on most models.
Add to wishlist
Add to basket
Quick view