New
Conical Hub Front Brake Cable Ferrule - Image 1
Conical Hub Front Brake Cable Ferrule - Image 2
Conical Hub Front Brake Cable Ferrule - Image 3
Click to enlarge
Conical Hub Front Brake Cable Ferrule
Conical Hub Front Brake Cable Ferrule - Image 2
Conical Hub Front Brake Cable Ferrule - Image 3
Conical Hub Front Brake Cable Stop
Conical Hub Front Brake Cable Stop £4.25
Back to products
Triumph and BSA SLS Front Spindle Nut - Thick
Triumph and BSA SLS Front Spindle Nut - Thick £8.50
BSA Triumph

Conical Hub Front Brake Cable Ferrule

£4.50

Triumph / BSA conical front hub brake cable ferrule.  Suitable for Triumph and BSA twins and triples circa 1971 to 1973. Serves as the cable ferrule/stop abutment for the front brake assembly.

43 in stock

Compare
Add to wishlist
SKU: 37-3997 Categories: , , , Tags: ,
Description

Triumph / BSA conical front hub brake cable ferrule.  Suitable for Triumph and BSA twins and triples circa 1971 to 1973. Serves as the cable ferrule/stop abutment for the front brake assembly.

You may also like…

New
Compare

Conical Hub Front Brake Cable Stop

, , ,
£4.25

Triumph / BSA conical front hub brake cable stop.  Suitable for Triumph and BSA twins and triples circa 1971 to 1973.  Serves as the cable anchor point at the brake drum or lever area to hold the outer clutch/brake cable sleeve in place.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50

    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Top Yoke Extended Nut

    ,
    £5.50

    This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Crinkle Rear Hub Cover: BSA Gold Star

    ,
    £28.00

    Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Bearing Cover: BSA “A “& “B” Series Models

    ,
    £8.50

    This cover washer is fitted under the top yoke, to cover the bearing.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Knob Securing Plate-BSA

    ,
    £15.00

    This secures the adjuster knob in place after adjustment.

    Add to wishlist
    Add to basket
    Quick view