New
Conical Hub Front Brake Cable Stop - Image 1
Conical Hub Front Brake Cable Stop - Image 2
Conical Hub Front Brake Cable Stop - Image 3
Conical Hub Front Brake Cable Stop
Conical Hub Front Brake Cable Stop - Image 2
Conical Hub Front Brake Cable Stop - Image 3
Triumph Handlebar Clamp Bolt
Triumph Handlebar Clamp Bolt £3.60
Back to products
Conical Hub Front Brake Cable Ferrule
Conical Hub Front Brake Cable Ferrule £4.50
BSA Triumph

Conical Hub Front Brake Cable Stop

£4.25

Triumph / BSA conical front hub brake cable stop.  Suitable for Triumph and BSA twins and triples circa 1971 to 1973.  Serves as the cable anchor point at the brake drum or lever area to hold the outer clutch/brake cable sleeve in place.

38 in stock

Compare
Add to wishlist
SKU: 37-3996 Categories: , , , Tag:
Description

Triumph / BSA conical front hub brake cable stop.  Suitable for Triumph and BSA twins and triples circa 1971 to 1973.  Serves as the cable anchor point at the brake drum or lever area to hold the outer clutch/brake cable sleeve in place.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£28.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist