Norton Oil Tank Connector
£7.50
Connector for oil tank to engine where feed to rockers is fitted.
Thread: 1/2″-20
Description
Connector for oil tank feed to engine where NO banjo feed to cylinder head rockers. Later Norton models.
Thread: 1/2″-20
Additional information
| Weight | 0.03 kg |
|---|---|
| Dimensions | 3 × 1 × 1 in |
| Brand |
Norton |
| Finish |
Polished |
| Fits |
Dominator ,Norton-350-750-Singles ,Norton-350-750-Twins |
| Makes |
Stainless Classics |
You may also like…
Related products
Late Norton Dominator Brake Rod Assembly
Complete brake rod assembly for Norton "88 & "99" Dominators, 500SS, and 650SS, also Atlas and Mercury models. It is also correct for the Featherbed framed Singles, ES2 and Model 50. It comes with the "flag" that operates the original type of stop-lamp switch, but this can be rotated to fix it in the ideal position for the switch.
Lightweight Norton Brake Rod Assembly
Complete brake rod assembly for Jubilee, Navigator and Electra. This type has a winged brake adjuster, and the original shape of clevis joint. Because the frame and cycle parts were developed from Francis Barnet, and James motorcycles, it may be found correct for some of these as well. Overall length: 21-1/2"
Norton Front Wheel Spindle ‘Round’ Type
Front wheel spindle 'round' type with 'tommy' bar hole.
Fitment:
- 7" wide yokes, 9/16-20 TPI = Pre-1964 narrow type forks (Dominator, ES2, etc ...) (20249)
- 7-3/8" wide yokes 9/16-20 TPI = Later Dominators 1964 onwards and AMC Hybrids (03-0055)
- 7-3/8" wide yokes 9/16-18 TPI = Commando and some very late Dominators
Silencer Clamp 1-1/2″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
