Rear Hub Nuts For Ariel Type Rear Hub BSA A10, A7 - Image 1
Rear Brake Drum Bearing Sleeve : BSA Gold Star
Rear Brake Drum Bearing Sleeve : BSA Gold Star £36.00
Back to products
Rear Hub Nuts For FWH BSA Rear Hub A10, A7
Rear Hub Nuts For FWH BSA Rear Hub A10, A7 £32.50

Rear Hub Nuts For Ariel Type Rear Hub BSA A10, A7

£32.00

These nuts (4-off) secure the rear sprocket on to the Ariel-type hub on the 1954-57 period A7 and A10, and some other models.

2 in stock

Compare
Add to wishlist
SKU: 42-6095 Categories: , Tags: , , ,
Description

These nuts (4-off) secure the rear sprocket on to the Ariel-type hub on the 1954-57 period A7 and A10, and some other models.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Compare

A65 Fork Top Nut Set

,
£36.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70

Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

Add to wishlist
This product has multiple variants. The options may be chosen on the product page
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist