Rocker Feed Dome Nut Set for BSA A7 and A10 - Image 1
Click to enlarge
Rocker Box Bolt Set: BSA A7 & A10
Rocker Box Bolt Set: BSA A7 & A10 £16.00
Back to products
Rocker Box Bolt Set (Polished): BSA A7 & A10
Rocker Box Bolt Set (Polished): BSA A7 & A10 £21.00

Rocker Feed Dome Nut Set for BSA A7 and A10

£9.20

These dome nuts (2-off) finish off the rocker spindle ends very nicely (3/8″-26 thread)

43 in stock

Add to compare
Add to wishlist
SKU: 65-0311 Categories: , Tags: , , , ,
Description

These dome nuts (2-off) finish off the rocker spindle ends very nicely (3/8″-26 thread)

Additional information
Weight 0.01 kg
Dimensions 0.6 × 0.65 in
Finish

Polished
Fits

BSA A7/A10
Makes

Stainless Classics

Related products

Add to compare

A65 Rear Sprocket Bolt Set

,
£26.00
Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle Nut

,
£6.50
This nut is for the later A7 & A10 with the 8" full width hub.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00
This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamp Spacer

,
£4.80
These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00
A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00
This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.
Add to wishlist
Add to basket
Quick view
Add to compare

Handlebar Clamp Screw – Long BSA

,
£3.60
These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.
Add to wishlist
Add to basket
Quick view
Add to compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80
The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.
Add to wishlist
Add to basket
Quick view