We are at the next Kempton autojumble - September 19th 2026
Featured Products
BSA - TRIUMPH - NORTON
Customer reviewed and highlighted products. Featuring products for your restorations.
Hot
Triumph QD Rear Chain Adjuster Set 7/8″ Bore
Suitable for many Triumph QD type swingarm models 1954 onwards.
Sold as a complete set (2-off) and comprise the adjusters (W1135), end plates (W1015) and 5/16" nyloc nuts (W1058).
End plates are cast and polished stainless to match the adjuster, these are a better quality than pressed steel types which do not follow the original pattern.
Hot
BSA Triumph Rear Chain Adjuster Set 5/8″ Bore
Suitable for many BSA (Rocket 3, etc ..) and Triumph twins and triples, T100, T120, T150, etc ...(conical hub).
Sold as a complete set (2-off) and comprise the adjusters (37-2089, 37-3919), end plates (W2089) and 5/16" nyloc nuts.
End plates are cast and polished stainless to match the adjuster, these are a better quality than pressed steel types which do not follow the original pattern.
Hot
Cycle 12 Point Cylinder Base Nut
Hot
Triumph 2LS Front Spindle Set 7-1/2″
Suitable for many Triumph Twin Leading Shoe (2LS) models 1968-70.
Complete set comprises of front spindle (w3582), 7-2/5" overall, and spindle nut (s1995).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Conical Hub Front Spindle Set 8-1/4″
Conical hub front spindle as fitted to many Triumph unit construction models 1971 onwards.
Complete set comprises of front spindle (w3796), 8-1/4" overall, and spindle nut (w2058).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Unit Construction Front Spindle Set 7-1/4″
Front spindle as fitted to many Triumph unit construction models 1964-67.
Complete set comprises of front spindle (W1641), 7-1/4" overall, and thin nut (w1246).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Unit and Pre-Unit Construction Front Spindle Set 7-1/16″
Front spindle as fitted to many Triumph unit construction models 1962/63 onwards, and 1954-62 pre-unit full width hub models (swinging arm).
Complete set comprises of front spindle (W1239), 7-1/16" overall, and thin nut (w1246).
Select options
This product has multiple variants. The options may be chosen on the product page
Sold out Hot
Extended Triumph and BSA Conical Hub Brake Lever arm Kit
Fitted to many models of BSA and Triumph twins & triples, this complete extended brake arm set suits models with the 8" TLS front conical hubs, and are designed to give better leverage for better braking experience.
These have been extended to provide an additional 50% in braking effort.
Our kit is fully complete with a pair of (37-3986 right 37-3987 left) brake lever arms, polished or brushed finish. 2-off trunnions (37-0011), cable stop and return spring (37-4014) all in stainless.
Choose your preferred finish, polished or brushed.
Select options
This product has multiple variants. The options may be chosen on the product page
Sold out Hot
