AMAL Carb Adjuster Set - Image 1
AMAL Carb Adjuster Set - Image 2
AMAL Carb Adjuster Set - Image 3
AMAL Carb Adjuster Set
AMAL Carb Adjuster Set - Image 2
AMAL Carb Adjuster Set - Image 3
Triumph Electric Start Motor Bolt
Triumph Electric Start Motor Bolt £2.40
Back to products
7/16" UNF x 4" Hex
7/16" UNF x 4" Hex £4.90
BSA Norton Triumph

AMAL Carb Adjuster Set

£4.50

Carburettor adjuster and nut for AMAL monobloc etc… 7/32″-40 TPI.

50 in stock

Compare
Add to wishlist
SKU: AMAL-ADJ-SET Categories: , , , , , Tags: , ,
Description

Carburettor adjuster and nut for AMAL monobloc etc… 7/32″-40 TPI.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist