BSA Dynamo Strap Assembly: A7 & A10 (Polished) - Image 1
Click to enlarge
Magneto/Dynamo Straps (Pair)
Magneto/Dynamo Straps (Pair) £45.00
Back to products
BSA Dynamo Strap Assembly: A7 & A10 (Dull Finish)
BSA Dynamo Strap Assembly: A7 & A10 (Dull Finish) £22.00

BSA Dynamo Strap Assembly: A7 & A10 (Polished)

£26.00

This strap assembly holds the dynamo to the crankcase, but only includes the strap and the trunnions.

Add to compare
Add to wishlist
SKU: 67-1876-P Categories: , Tags: , , ,
Description

This strap assembly holds the dynamo to the crankcase, but only includes the strap and the trunnions.

Additional information
Weight .09 kg
Dimensions 3.5 × 3.5 × .8 in
Finish

Polished
Fits

BSA A7/A10
Makes

Stainless Classics

Related products

Add to compare

A10 Gold Star Fork Top Nut

,
£14.50
These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.
Add to wishlist
Quick view
Add to compare

A65 Fork Top Nut Set

,
£29.00
These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.
Add to wishlist
Quick view
Add to compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50
This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs. 3/4"-20TPI
Add to wishlist
Quick view
Add to compare

BSA and Triumph Fork Top Nut Washers

,
£5.00
These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".
Add to wishlist
Quick view
Add to compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00
A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
Add to wishlist
Quick view
Add to compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00
This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.
Add to wishlist
Quick view
Add to compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50
This cover washer is fitted under the top yoke, to cover the bearing.
Add to wishlist
Quick view
Add to compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80
The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.
Add to wishlist
Quick view