BSA Plunger Models Brake Rod Assembly - Image 1
Click to enlarge
BSA A50/A65 Brake Rod Only (20")
BSA A50/A65 Brake Rod Only (20") £7.00
Back to products
BSA C15/B40 Brake Rod Assembly
BSA C15/B40 Brake Rod Assembly £32.00

BSA Plunger Models Brake Rod Assembly

£34.00

Complete brake rod assembly for BSA Plunger framed twins and singles, including early 1950’s B34, B31 & A7 and A10 models.

2 in stock (can be backordered)

Compare
Add to wishlist
SKU: BSAPBRA Categories: , , Tags: ,
Description

Complete brake rod assembly for BSA Plunger framed twins and singles, including early 1950’s B34, B31 & A7 and A10 models.

Related products

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view