BSA C15/B40 Brake Rod Assembly - Image 1
Click to enlarge
BSA Plunger Models Brake Rod Assembly
BSA Plunger Models Brake Rod Assembly £34.00
Back to products
BSA A50/A65 Brake Rod Assembly
BSA A50/A65 Brake Rod Assembly £30.00

BSA C15/B40 Brake Rod Assembly

£32.00

Complete brake rod assembly for C15 and B40 models. This assembly will also be found to be correct for some later variants of the Triumph and BSA singles, as well as some A50/ A65 types. The overall length is 19-1/2″.

Compare
Add to wishlist
SKU: BSAC5BRA Categories: , , Tags: , ,
Description

Complete brake rod assembly for C15 and B40 models. This assembly will also be found to be correct for some later variants of the Triumph and BSA singles, as well as some A50/ A65 types. The overall length is 19-1/2″.

Related products

Compare

BSA A7 & A10 Front Spindle Nut

,
£6.50

This nut is for the later A7 & A10 with the 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view