BSA Rear Brake Pivot Pin Nut and Washer Set - Image 1
BSA Rear Brake Pivot Pin Nut and Washer Set - Image 2
BSA Rear Brake Pivot Pin Nut and Washer Set - Image 3
Click to enlarge
BSA Rear Brake Pivot Pin Nut and Washer Set
BSA Rear Brake Pivot Pin Nut and Washer Set - Image 2
BSA Rear Brake Pivot Pin Nut and Washer Set - Image 3
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set £11.00
Back to products
BSA Petrol Tap Dome Nut Set
BSA Petrol Tap Dome Nut Set £12.00
BSA

BSA Rear Brake Pivot Pin Nut and Washer Set

£11.00

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate, single sided hub 7 and 8″

Suitable for various models

5/8″ – 20TPI .820 A/F

14 in stock

Compare
Add to wishlist
SKU: 21-5105 Categories: ,
Description

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate, single sided hub 7 and 8″

Suitable for various models

5/8″ – 20TPI .820 A/F

You may also like…

Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Lower Yoke Bolts

    ,
    Price range: £7.20 through £15.70

    Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

    Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    Compare

    Fork Seal Holders BSA

    ,
    £95.00

    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Knob Securing Plate-BSA

    ,
    £15.00

    This secures the adjuster knob in place after adjustment.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Star Washer: BSA “A” & “B” Series Models

    ,
    £9.50

    This star washer is part of the steering damper assembly, fitted under the lower steering yoke.

    Add to wishlist
    Add to basket
    Quick view