Sold out
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set - Image 1
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set - Image 2
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set - Image 3
Click to enlarge
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set - Image 2
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set - Image 3
BSA Rear Brake Fulcrum Nut and Washer Set
BSA Rear Brake Fulcrum Nut and Washer Set £11.00
Back to products
BSA Rear Brake Pivot Pin Nut and Washer Set
BSA Rear Brake Pivot Pin Nut and Washer Set £11.00
BSA

BSA 7″ 8″ Rear Brake Fulcrum Nut and Washer Set

£11.00

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate, single sided hub 7 and 8″

Suitable for B33/34

5/8″ – 20TPI .920 A/F

Out of stock

Compare
Add to wishlist
SKU: 15-0541 Categories: ,
Description

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate, single sided hub 7 and 8″

Suitable for B33/34

5/8″ – 20TPI .920 A/F

You may also like…

Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Fork Seal Holders BSA

    ,
    £95.00

    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Sold out
    Compare

    Front Brake Fulcrum For A7 & A10 BSA

    ,
    £18.50

    For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Read more
    Quick view
    Compare

    Handlebar Clamp Screw BSA

    ,
    £2.80

    These are the normal short clamp screws, used on most models.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Centre: BSA “A” & “B” Series Models

    ,
    £8.50

    This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Star Washer: BSA “A” & “B” Series Models

    ,
    £9.50

    This star washer is part of the steering damper assembly, fitted under the lower steering yoke.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Stem Sleeve Cap: BSA & Ariel: No Damper

    ,
    £15.00

    This cap is fitted on a few models where there is no need for a central hole, when no steering damper is fitted.  Otherwise, it is identical to the part fitted to later A10 and Gold Star.

    Add to wishlist
    Add to basket
    Quick view