Dynamo Strap Eyebolt - Image 1
Dynamo Strap Eyebolt - Image 2
Dynamo Strap Eyebolt - Image 3
Click to enlarge
Dynamo Strap Eyebolt
Dynamo Strap Eyebolt - Image 2
Dynamo Strap Eyebolt - Image 3
Lower Yoke Pinch Studs
Lower Yoke Pinch Studs £11.20
Back to products
Norton Twin Leading Shoe Set
Norton Twin Leading Shoe Set £54.00
BSA

Dynamo Strap Eyebolt

£9.25

Dynamo strap eyebolt.

Overall length, 2.33″

25 in stock (can be backordered)

Compare
Add to wishlist
SKU: 29-2203 Categories: ,
Description

Dynamo strap eyebolt.

Overall length, 2.33″

Related products

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist
Add to basket
Quick view