Rear Brake Anchor Bolt A7 & A10 BSA - Image 1
Rear Brake Anchor Bolt A7 & A10 BSA - Image 2
Click to enlarge
Rear Brake Anchor Bolt A7 & A10 BSA
Rear Brake Anchor Bolt A7 & A10 BSA - Image 2
13/16" Shakeproof Washer
13/16" Shakeproof Washer £0.50
Back to products
Rear Brake Fulcrum pin Assembly A7 & A10 BSA
Rear Brake Fulcrum pin Assembly A7 & A10 BSA £19.00
BSA

Rear Brake Anchor Bolt A7 & A10 BSA

£17.75

For BSA A7 & A10. Complete with nut & washer. It is tapped 5/16″-26 for the cable adjuster.

28 in stock

Add to compare
Add to wishlist
SKU: 42-6352 Categories: , Tag:
Description

For BSA A7 & A10. Complete with nut & washer. It is tapped 5/16″-26 for the cable adjuster.

You may also like…

Add to compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50
For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For A7 & A10 BSA (No Adj.)

,
£18.50
For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster. Fulcrum without adjuster is available also.
Add to wishlist
Add to basket
Quick view

    Related products

    Add to compare

    A65 Rear Sprocket Bolt Set

    ,
    £26.00
    Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA A7 & A10 Front Spindle Nut

    ,
    £6.50
    This nut is for the later A7 & A10 with the 8" full width hub.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA A7 & A10 Front Spindle Ariel Full Width Hub

    ,
    £34.00
    This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00
    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Fork Seal Holders BSA

    ,
    £95.00
    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Handlebar Clamp Screw BSA

    ,
    £2.80
    These are the normal short clamp screws, used on most models.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Steering Bearing Cover: BSA “A “& “B” Series Models

    ,
    £8.50
    This cover washer is fitted under the top yoke, to cover the bearing.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80
    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.
    Add to wishlist
    Add to basket
    Quick view