Front Brake Fulcrum For A7 & A10 BSA (No Adj.) - Image 1
Click to enlarge
1BA Full Hex Nut Large
1BA Full Hex Nut Large £1.20
Back to products
Polished Conical Hub Nut
Polished Conical Hub Nut £8.50

Front Brake Fulcrum For A7 & A10 BSA (No Adj.)

£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16″-26 for the cable adjuster.

Fulcrum without adjuster is available also.

28 in stock

Compare
Add to wishlist
SKU: 42-5885S Categories: , Tags: ,
Description

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16″-26 for the cable adjuster.

Fulcrum without adjuster is available also.

You may also like…

Compare

Rear Brake Fulcrum pin Assembly A7 & A10 BSA

,
£19.00

Rear brake assembly for BSA A7 & A10, includes polished dome nut and thick washer.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    A65 Fork Top Nut Set

    ,
    £29.00

    These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Lever, 8″ Full Width Hub, A7 & A10

    ,
    £12.50

    This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Centre: BSA “A” & “B” Series Models

    ,
    £8.50

    This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

    Add to wishlist
    Add to basket
    Quick view