Steering Stem Sleeve Cap: BSA M20 & Similar Models - Image 1
Steering Stem Sleeve Cap: BSA Late A65 & A50 Models
Steering Stem Sleeve Cap: BSA Late A65 & A50 Models £22.50
Back to products
Steering Stem Sleeve Cap: BSA M20 & Similar Models, No Damper
Steering Stem Sleeve Cap: BSA M20 & Similar Models, No Damper £13.50

Steering Stem Sleeve Cap: BSA M20 & Similar Models

£13.50

This is fitted at the top, middle of the Steering Column, on M20 and other models of that period. It has a central hole for the steering damper rod.  The thread is 1-1/8″ diameter, and the outside is 1-3/8″ dia.

5 in stock (can be backordered)

Compare
Add to wishlist
SKU: M20STEM Categories: , Tag:
Description

This is fitted at the top, middle of the Steering Column, on M20 and other models of that period. It has a central hole for the steering damper rod.  The thread is 1-1/8″ diameter, and the outside is 1-3/8″ dia.

Related products

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist