Triumph Trident Crankcase Timing Plug - Image 1
Triumph Trident Crankcase Timing Plug - Image 2
Triumph Trident Crankcase Timing Plug - Image 3
Triumph Trident Crankcase Timing Plug
Triumph Trident Crankcase Timing Plug - Image 2
Triumph Trident Crankcase Timing Plug - Image 3
Triumph Front Mudguard Stay Pivot Bolt Set
Triumph Front Mudguard Stay Pivot Bolt Set Price range: £3.60 through £13.20
Back to products
Triumph pre-Unit Centre Stand Spring
Triumph pre-Unit Centre Stand Spring £6.40
Triumph

Triumph Trident Crankcase Timing Plug

£6.50

Timing crankcase plug (bolt), suitable for both the T150, T160, A75 (X75) Trident models.

9/16″-12 UNC

17 in stock

Compare
Add to wishlist
SKU: 70-8755 Categories: , , , Tags: , , , ,
Description

Timing crankcase plug (bolt), suitable for both the T150, T160, A75 (X75) Trident models.

9/16″-12 UNC

Related products

Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Sold out
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist