Triumph Front Brake Clevis Set
£10.00
Triumph clevis joint designed to fit the brake cable end and to fit onto the brake operating arms.
27 in stock
This is a similar shape to the type used on the (2LS) twin leading-shoe front brake, however was designed to fit the brake cable end and to fit onto the brake operating arms.
You cable maker will require this clevis joint when supplying/fitting your cable.
You may also like…
Early Triumph (3T & 5T) Brake Rod Assembly
Early Triumph Brake Rod Assembly
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
Related products
Lucas Headlamp Bolts
Polished Lucas headlamp bolts (2-off) 5/16-26TPI cycle (or CEI). These fit most BSA, Norton and Triumph (99-1004, 06-8039) marques.
Alternative option for modern headlamp, 5/16-24TPI UNF is available. Select option as required.
Silencer Clamp 1-5/8″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
