Twin Leading Shoe (TLS) Hub Nut - Image 1
Twin Leading Shoe (TLS) Hub Nut - Image 2
Click to enlarge
Twin Leading Shoe (TLS) Hub Nut
Twin Leading Shoe (TLS) Hub Nut - Image 2
Triumph T140 Fork Cap Nut Set Recessed
Triumph T140 Fork Cap Nut Set Recessed £31.00
Back to products
Conical Hub Front Spindle 8.25"
Conical Hub Front Spindle 8.25" £42.00
BSA Triumph

Twin Leading Shoe (TLS) Hub Nut

£5.50

2LS hub front brake nut, 20TPI, 0.250″.  Suitable for many BSA and Triumph models from 1969 onwards.

2 in stock

Compare
Add to wishlist
SKU: S1995 Categories: , , , Tags: , , , ,
Description

2LS hub front brake nut, 20TPI, 0.250″.  Suitable for many BSA and Triumph models from 1969 onwards.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£24.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view