We are at the next Kempton autojumble - May 9th 2026
Triumph Winged Brake Adjuster Nut
Brake Components Brake Adjusters BSA BSA Rear Wheel and Suspension Triumph Triumph Rear Wheel and Suspension
Triumph winged adjuster for unit construction twins. These adjusters appeared around 1960 and were used until the UNF version took over from about 1968 onwards. Select your required variation.
- 1/4"-26TPI BSF, 1960-68 (F4585)
- 1/4"-28TPI UNF, 1968-70 and later BSA's from 1972 onwards (82-7387)
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
UNF 12 Point Cylinder Base Nut
Unit Triumph Twin 350-500cc Head Bolt Set
Suitable for unit Triumph twin 350-500cc models, Daytona, Tiger 90 (T90), 3TA, 5TA. Set comprises of:
4 x Domed outer head bolts (E4456) 3/8"-26 TPI x 2.781"
2 x Torque long bolts (E3795) 3/8"-26 TPI x 5-7/16"
2 x Inner head bolt (E3794) 5/16"-26TPI x 5-7/16"
4 x plain washers, 4 x outer head thick washers
Unit Triumph Twin Head Bolt Set
-14%
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
