Triumph and BSA Fork Bottom Spindle Clamp Bolts
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Fork Oil Drain Screws
Bolts, BA Bolts, Nuts and Bolts, BSA, BSA Front Wheel and Forks, Triumph, Triumph Front Wheel and Forks
2BA Triumph fork drain screws (2-off). These will be suitable for many different models.
Select the head type required.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Kickstart Cotter Pin
Milled Triumph and BSA cotter pin (1-off) complete with machined washer and plain nut. Suitable for a large number of models including the OIF T120, T140, T150 and T160 triples.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4
H2290, 3/8"-UNF Triumph / BSA lower pinch bolts (2-off), 2-1/4" U.H.
Suitable for most pre-OIF (Oil In Frame) models, 1968-70.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle
H941, 3/8"-CEI (Cycle) polished dome Triumph lower pinch bolts (2-off), 2-1/4" U.H.
Suitable for pre-unit and unit construction 650's, up 1968.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-3/4
14-0238, 3/8"-UNF Triumph /BSA lower pinch bolts (2-off), 2-3/4" U.H.
Suitable for most OIF (Oil In Frame) models, 1971 onwards.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA OIF Tank Mounting Bolt
Suitable for all Triumph 650 OIF "Oil in Frame" twins, Bonneville, T120R, Tiger, TR6, TR6RV, Trophy, etc from 1971-1972 fitted with the centre locking rib on the down tube frame.
Additionally the bolt is also suitable for BSA A65 Twins (Lightning, Thunderbolt & Firebird Scrambler) from 1971-1972.
Measure 3.760" UH
Triumph and BSA Timing Plug
Triumph and BSA Yoke Sleeve Nut
Triumph Front Wheel Twin Leading Shoe 7″ and 8″ Kit
Triumph and BSA twin leading shoe (2LS) kit, suitable for both 7" or 8" hub.
Complete kit including arms, nut and linkage (trunnions and cotter pins). Select your required length 7" or 8", and arm type, Straight or Cranked. Alternatively, select the 7" or 8" Complete Rod and Yokes Only if you already have the arms and nuts.
Return spring, conical hub spindle and thin type nut are also available, linked below.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph Singles Tool Tray Bolt Set
Nuts and Bolts, Bolts, BSA, BSA Centre Section and Cycle Parts, Triumph, Triumph Centre Section and Cycle Parts, UNC/UNF Bolts
