Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle - Image 1
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle - Image 2
Click to enlarge
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle - Image 2
Triumph and BSA Lower Yoke Pinch Bolts 2-3/4
Triumph and BSA Lower Yoke Pinch Bolts 2-3/4 Price range: £4.80 through £15.30
Back to products
Triumph and BSA Yoke Sleeve Nut
Triumph and BSA Yoke Sleeve Nut £4.00
Triumph

Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle

Price range: £6.40 through £9.10

H941, 3/8″-CEI (Cycle) polished dome Triumph lower pinch bolts (2-off), 2-1/4″ U.H.

Suitable for pre-unit and unit construction 650’s, up 1968.

Compare
Add to wishlist
SKU: H941 Categories: , , , Tags: ,
Description

H941, 3/8″-CEI (Cycle) polished dome Triumph / BSA lower pinch bolts (2-off), 2-1/4″ U.H.

Suitable for pre-unit and unit construction 650’s, up 1968.

You may also like…

Compare

Triumph and BSA Lower Yoke Pinch Bolts 2-1/4

, , ,
Price range: £5.60 through £8.80

H2290, 3/8"-UNF Triumph / BSA lower pinch bolts (2-off), 2-1/4" U.H.

Suitable for most pre-OIF (Oil In Frame) models, 1968-70.

Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Compare

Triumph and BSA Lower Yoke Pinch Bolts 2-3/4

, , ,
Price range: £4.80 through £15.30

14-0238, 3/8"-UNF Triumph /BSA lower pinch bolts (2-off), 2-3/4" U.H.

Suitable for most OIF (Oil In Frame) models, 1971 onwards.

Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

    Related products

    Compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50

    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Crinkle Rear Hub Cover: BSA Gold Star

    ,
    £24.00

    Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Bearing Cover: BSA “A “& “B” Series Models

    ,
    £8.50

    This cover washer is fitted under the top yoke, to cover the bearing.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80

    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Centre: BSA “A” & “B” Series Models

    ,
    £8.50

    This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

    Add to wishlist
    Add to basket
    Quick view