BSA Gearbox Adjuster Set
BSA Plunger Frame Gearbox Mounting/Adjuster Set
Double Adjuster Set Conversion Kit
Double adjuster set conversion kit with small abutment pin as standard, please select the type required for large or standard (small) type abutment pin.
Set comprises:
- Plain adjuster (23) - 5" long
- 2-off reduced hex nuts (25)
- Abutment pin (26, 27, 28) - standard (small) type or large as chosen.
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Commando Primary Gearbox Double Adjuster Assembly
Norton Commando double gearbox primary adjuster assembly/kit. Options are availabe to suit standard engine plates as well as alloy plats that are typically 8 / 10mm thick, select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Primary Gearbox Double Adjuster Assembly
Double gearbox primary adjuster assembly/kit for use with belt drive primary on Featherbed models. Options are available to suit standard engine plates as well as alloy plates that are typically 8 / 10mm thick, select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Slickshift Midway Clutch Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us.
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type with the midway angled cable abutment, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
Slickshift Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph Pre-Unit Gearbox Adjuster Set
Triumph pre-unit construction single sided plain adjuster set, this is a common adjuster set, however please select the type required should you need longer stud needed for alloy (thicker) plates.
Set comprises:
- Stud (item 19)
- Long stud nut (22) - Note: shown short in diagram.
- Short stud nut (20) LHS
- Serrated washer (21) - Note: Serrations face engine plate outer surface.
- Plain adjuster (23) - 5" long
- 2-off reduced hex nuts (25)
- Abutment pin (26, 27, 28) - small type or large as chosen.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph Pre-War Gearbox Adjuster
