Show sidebar
Show 9 12 18 24
Add to compare

BSA Brake Adjuster

, , ,
£8.50
1/4" BSF thread, used on many BSA models.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Brake Clevis Set

, , , ,
£13.60
1/4" BSF thread.  Complete with pivot screw and thin hex nut.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Gold Star Front Brake Stay

,
£26.00
BSA Gold Star front brake torque stay.  This is used on the 190mm front brake, and the 8” Single-sided 8” front brake fitted to many other models.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50
For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50
For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50
For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Fulcrum For A7 & A10 BSA (No Adj.)

,
£18.50
For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster. Fulcrum without adjuster is available also.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50
This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50
This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph and BSA Conical Hub Rear Brake Lever / Arm

, , ,
£18.50
Suitable for the Triumph and BSA conical rear hubs, this lever will hang 'down' and is suitable for models including 650 unit twins (Bonneville, T120R, T120RV, TR6, etc ...), T150/T150V triples and also, BSA Rocket III, B25SS, B50SS & A65 twins.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Rear Brake Arm 1964-70

,
£18.00
Triumph rear brake arm lever suitable for 650,500 and 350 models circa 1964-70.  Typically used with the stepped brake rod trunnion.  Complete brake rods with adjuster and trunnions are available. 3" centres
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph T140 Front Caliper Stud Kit

,
£10.50
Set (2-off) front caliper mounting studs. 3/8" BSF/UNC
Add to wishlist
Add to basket
Quick view