BSA Rear Brake Fulcrum Nut and Washer Set - Image 1
BSA Rear Brake Fulcrum Nut and Washer Set - Image 2
BSA Rear Brake Fulcrum Nut and Washer Set - Image 3
BSA Rear Brake Fulcrum Nut and Washer Set
BSA Rear Brake Fulcrum Nut and Washer Set - Image 2
BSA Rear Brake Fulcrum Nut and Washer Set - Image 3
Black square stainless classics coming soon image.
Norton Commando Centre Stem Nut £4.80
Back to products
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set
BSA 7" 8" Rear Brake Fulcrum Nut and Washer Set £11.00
BSA

BSA Rear Brake Fulcrum Nut and Washer Set

£11.00

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate.

Suitable for A10 (early), A65, Goltstar and Rocket Gold Star

1/2″ – 20TPI .820 A/F

22 in stock

Compare
Add to wishlist
SKU: 24-7000 Categories: ,
Description

BSA rear brake fulcrum pinion nut and washer set.  Fits torque arm to bottom plate.

Suitable for A10 (early), A65, Goltstar and Rocket Gold Star

1/2″ – 20TPI .820 A/F

You may also like…

Compare

Rear Brake Fulcrum Pin: BSA Gold Star, A10

,
£18.00

Rear brake fulcrum pin for Gold Star, B31/33, RGS and some A7 and A10 models.(including nut & washer).

Add to wishlist

    Related products

    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Compare

    Handlebar Clamp Screw BSA

    ,
    £2.80

    These are the normal short clamp screws, used on most models.

    Add to wishlist
    Compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80

    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

    Add to wishlist
    Compare

    Steering Damper Centre: BSA “A” & “B” Series Models

    ,
    £8.50

    This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

    Add to wishlist
    Compare

    Steering Damper Knob Securing Plate-BSA

    ,
    £15.00

    This secures the adjuster knob in place after adjustment.

    Add to wishlist