BSA A65 Front Chaincase Bolt - Image 1
BSA A65 Front Chaincase Bolt - Image 2
BSA A65 Front Chaincase Bolt - Image 3
Click to enlarge
BSA A65 Front Chaincase Bolt
BSA A65 Front Chaincase Bolt - Image 2
BSA A65 Front Chaincase Bolt - Image 3
BSA breather pipe 3mm
BSA breather pipe 3mm £4.80
Back to products
BSA A7/A10 Front Chaincase Stud
BSA A7/A10 Front Chaincase Stud £2.50
BSA

BSA A65 Front Chaincase Bolt

£3.90

BSA A65 front chaincase bolt, dished / domed hex head.

3-1/4″ x 5/16″-26TPI

17 in stock (can be backordered)

Compare
Add to wishlist
SKU: 68-0031 Categories: , Tag:
Description

BSA A65 front chaincase bolt, dished / domed hex head.

3-1/4″ x 5/16″-26TPI

Related products

Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view