BSA breather pipe 3mm - Image 1
BSA breather pipe 3mm - Image 2
BSA breather pipe 3mm - Image 3
Click to enlarge
BSA breather pipe 3mm
BSA breather pipe 3mm - Image 2
BSA breather pipe 3mm - Image 3
BSA Rocker Oil Feed Bolt 2.4mm
BSA Rocker Oil Feed Bolt 2.4mm £4.80
Back to products
BSA A65 Front Chaincase Bolt
BSA A65 Front Chaincase Bolt £3.90
BSA

BSA breather pipe 3mm

£4.80

BSA petrol tank breather pipe / banjo bolt for Gold Star.

Hole is 3.0mm.

12 in stock

Add to compare
Add to wishlist
SKU: 27-8346 Categories: , Tag:
Description

BSA petrol tank breather pipe / banjo bolt for Gold Star.

Hole is 3.0mm.

Additional information
Weight 0.01 kg
Brand

BSA
Finish

Polished
Makes

Stainless Classics
Fits

BSA Gold Star

You may also like…

Add to compare

BSA Rocker Oil Feed Bolt 1.25mm

,
£4.80
BSA rocker spindle oil feed banjo bolt suitable for Gold Star, A7 and A10. Hole is 1.25mm which can be opened up with a suitable drill bit.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Rocker Oil Feed Bolt 2.4mm

,
£4.80
BSA rocker spindle oil feed banjo bolt suitable for Gold Star, A7 and A10. Hole is 2.4mm.
Add to wishlist
Add to basket
Quick view

    Related products

    Sold out
    Add to compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50
    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.
    Add to wishlist
    Read more
    Quick view
    Add to compare

    A65 Rear Sprocket Bolt Set

    ,
    £26.00
    Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA A7 & A10 Front Spindle Nut

    ,
    £6.50
    This nut is for the later A7 & A10 with the 8" full width hub.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50
    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs. 3/4"-20TPI
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00
    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00
    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA Top Yoke Extended Nut

    ,
    £5.50
    This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Handlebar Clamp Screw – Long BSA

    ,
    £3.60
    These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.
    Add to wishlist
    Add to basket
    Quick view