Polished Conical Hub Nut - Image 1
Polished Conical Hub Nut - Image 2
Polished Conical Hub Nut - Image 3
Click to enlarge
Polished Conical Hub Nut
Polished Conical Hub Nut - Image 2
Polished Conical Hub Nut - Image 3
Front Brake Fulcrum For A7 & A10 BSA (No Adj.)
Front Brake Fulcrum For A7 & A10 BSA (No Adj.) £18.50
Back to products
BSA Shouldered Outer Gearbox Cover Nut
BSA Shouldered Outer Gearbox Cover Nut £2.40
BSA Triumph

Polished Conical Hub Nut

£8.50

Polished conical hub front brake nut, 20TPI, 0.370″.  Suitable for many BSA and Triumph models from 1969 onwards.

16 in stock (can be backordered)

Compare
Add to wishlist
SKU: 37-2058 Categories: , , , Tags: , , ,
Description

Polished conical hub front brake nut, 20TPI, 0.370″.  Suitable for many BSA and Triumph models from 1969 onwards.

You may also like…

Hot
Compare

Triumph 2LS Front Spindle Set 7-1/2″

,
Price range: £6.50 through £40.50

Suitable for many Triumph Twin Leading Shoe (2LS) models 1968-70.

Complete set comprises of front spindle (w3582), 7-2/5" overall, and spindle nut (s1995).

Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Compare

Twin Leading Shoe (TLS) Hub Nut

, , ,
£5.50

2LS hub front brake nut, 20TPI, 0.250".  Suitable for many BSA and Triumph models from 1969 onwards.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Fork Seal Holders BSA

    ,
    £95.00

    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Bearing Cover: BSA “A “& “B” Series Models

    ,
    £8.50

    This cover washer is fitted under the top yoke, to cover the bearing.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80

    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

    Add to wishlist
    Add to basket
    Quick view