Triumph and BSA Yoke Sleeve Nut - Image 1
Triumph and BSA Yoke Sleeve Nut - Image 2
Click to enlarge
Triumph and BSA Yoke Sleeve Nut
Triumph and BSA Yoke Sleeve Nut - Image 2
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle Price range: £6.40 through £9.10
Back to products
BSA A7 / A10 and RGS Crankcase Stud Kit
BSA A7 / A10 and RGS Crankcase Stud Kit £66.00
BSA Triumph

Triumph and BSA Yoke Sleeve Nut

£4.00

Polished sleave dome headed yoke nut suitable for most Triumph and BSA OIF (Oil In Frame) models, 1971 onwards.

Add to compare
Add to wishlist
SKU: 21-2062 Categories: , , ,
Description

Polished sleeve dome headed yoke nut suitable for most Triumph and BSA OIF (Oil In Frame) models, 1971 onwards.

Additional information
Weight 0.01 kg
Brand

BSA

,

Triumph
Finish

Polished
Makes

Stainless Classics
Fits

bsa-oif

,

triumph-oif

You may also like…

Add to compare

Triumph and BSA Lower Yoke Pinch Bolts 2-1/4

, , ,
Price range: £5.60 through £8.80
H2290, 3/8"-UNF Triumph / BSA lower pinch bolts (2-off), 2-1/4" U.H. Suitable for most pre-OIF (Oil In Frame) models, 1968-70.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Add to compare

Triumph and BSA Lower Yoke Pinch Bolts 2-3/4

, , ,
Price range: £4.80 through £15.30
14-0238, 3/8"-UNF Triumph /BSA lower pinch bolts (2-off), 2-3/4" U.H. Suitable for most OIF (Oil In Frame) models, 1971 onwards.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

    Related products

    Add to compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50
    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    A65 Rear Sprocket Bolt Set

    ,
    £26.00
    Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA A7 & A10 Front Spindle Ariel Full Width Hub

    ,
    £34.00
    This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00
    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00
    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    BSA Lower Yoke Bolts

    ,
    Price range: £7.20 through £15.70
    Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135. Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.
    Add to wishlist
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    Add to compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50
    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.
    Add to wishlist
    Add to basket
    Quick view
    Add to compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00
    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.
    Add to wishlist
    Add to basket
    Quick view